Blog / CSEB and interlocking
Hydraulic pressure requirements for CSEB blocks
Bar, tonnes and kg/cm²: what hydraulic pressure and press force mean for CSE blocks, how to convert between them, and why single and dual compression matter.
Possible Machines Private Limited ·
Machine brochures quote pressure in three different ways, and they are often mixed up. Understanding the difference is the quickest way to compare one hydraulic CSEB machine with another.

Three numbers, three meanings
bar
Oil pressure
How hard the pump pushes oil into the cylinder. Our 4 cavity machine and PMHB24 run at 200 bar.
tonf
Press force
The total force the cylinder puts on the mould. Our automatic plant gives at least 25 tonf per block.
kg/cm²
Block pressure
The force spread over the face of one block. This is what compacts the soil.
How they connect
Force = oil pressure × cylinder area. One bar is about 1 kg on every square centimetre. So the same 200 bar gives a bigger force from a bigger cylinder. That is why oil pressure alone tells you little: always ask for the force per block.
Block pressure = force ÷ block face area. A 300 × 150 mm block has a face of 450 cm². At 25 tonf on that face, the soil is compacted at about 55 kg/cm², roughly 5.4 N/mm².
Worked example
25,000 kg ÷ (30 cm × 15 cm) = 25,000 ÷ 450 ≈ on each 300 × 150 mm block.